Download - Bitcoin

Gridcoin 5.0.0.0-Mandatory "Fern" Release

https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/5.0.0.0
Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that.
Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap.
We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout.
Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.

Highlights

Protocol

Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now.
Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date.
The transition height is also when the team requirement will be relaxed for the network.

GUI

Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.

Blockchain

The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use.
There are so many goodies here it is hard to summarize them all.
I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures.
The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!

Summary Changelog

Accrual

Changed

Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.

Removed

Beacons

Added

Changed

Removed

Unaltered

As a reminder:

Superblocks

Added

Changed

Removed

Voting

Added

Changed

Removed

Detailed Changelog

[5.0.0.0] 2020-09-03, mandatory, "Fern"

Added

Changed

Removed

Fixed

submitted by jamescowens to gridcoin [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

State of the Redd-Nation :: May 23, 2016

Reddcoin Weekly Development Update

Welcome again Reddheads to another weekly update of Reddcoin Development.
This past week has achieved quite a few updates.

New v2.0 Wallet and testing progress

During this last week, I have been performing testing on the switch-over logic from v3 to v4 blocks on testnet using both the version 1.4.1 wallet and version 2.0.0.0 wallet. Results have been better than expected and I am very happy with the progress so far.

Network Testing with Super-Majority

The recent testing with testnet was performed by setting the super-majority to 510/1000 blocks (51%). That is, when there have been 510 v4 blocks created in the last 1000 blocks, the rules for v4 blocks are enabled (Enforce DER Signatures). v3 blocks will then be rejected by the network.
On mainnet, the setting will be updated to be a Super-Majority 85%

Staking with different versions

Wallet Staking Block Ver Accepted by v1.4.1 Accepted by v2.0.0 Rejected by v2.0.0
Ver 1.4.1 YES v3 YES NO YES
Ver 2.0.0 YES v4 YES YES NO
SOME NOTES: After the switch of Super-Majority completes, version 1.4.1 nodes will continue to stake however, the network will reject those blocks. This is expected behaviour.

Transferring between versions

v1.4.1 v2.0.0
v1.4.1 YES YES
v2.0.0 YES YES
SOME NOTES Current testing of transferring coins between different wallet versions has been successful. Current indications are that if you are not staking, you will be able to continue to use v1.4.1 wallets. More testing to be done.
If you have any questions, or would like to know more on this, please let me know.

Translations

Translations continue to be updated which is great to see. Thank you to all those who are contributing their time and effort.
@Serkan34 continues to dominate on the European languages.
This is the running list of desired languages, and if you like you can also check the overall running list on transiflex here.

Wallet Recovery

As mentioned last week, wallet recover is no easy task. There are a few tools around on the net that can help, but it is no way guaranteed to provide 100% recovery.
So, it is important that you get in the habit of routinely backing up your wallet.dat file
For the second time in as many weeks, I have used the utility called pywallet that in my case has done a reasonable job to recover broken wallets. It is a python based tool that allows some low level manipulation of wallet files.
In this second case, it involved recovering the private keys from a testnet wallet (100K keys in total). The wallet.dat would load into Reddcoin-Qt, but then the application would sit spinning its wheels, without error, and no way to dump. Running the QT application with -salvage wallet would truncate the number of addresses that should have been available ion the wallet.
So, using the pywallet, I was able to load up read the available privatekeys in the wallet and dump the keys to a text file. This essentially was the same as last week. 100% of the privkeys were salvageable
I still have some problems importing those directly into a new wallet using the pywallet tool, and with such a large number of private keys, manual input was not an option.
I wrote a little script to pull the private keys from a text file and send a importprivatekey RPC command to the wallet. A little slower, but none the less it was effective and successful.
After starting the wallet with -rescan, it brought everything upto date with those associated addresses and their tx's into the wallet.

Large number of Micro Transactions on mainnet

Over the course of several weeks, there have been a number of instances where a large number of small transactions were broadcast onto the network.
It was brought up in a couple of forum messages on reddit and reddcointalk, so I thought it might be worthwhile just to touch on it again here.
Firstly, I would like to say, this is similar to reports that occurred on Bitcoin network where small transactions were sent to fill blocks. So I was interested to monitor just how such behaviours would occur on Reddcoins Mainnet and what the effects might be.
Reddcoin mainnet has in effect a 10x larger capacity that Bitcoin. The blocksize for Reddcoin is 1M, and the block generation time is targeted every minute (Bitcoin is 1M blocks every 10 minutes).
In the 'worst' case the maximum capacity that these transactions took on the network, was to occupy less than 25% of each block (about 230K in total)
With the number of transactions that were occurring, there were at times excesses of transactions that spilled over into subsequent blocks (again, only filling each of those to 25% capacity). When this occurred,e there were runs of up to 10-12 blocks that were filled.
In the current state of the network, where volume of transactions generally is low, it has been a good exercise to monitor the behaviour of sudden peak demand. I didnt hear of nay cases where normal transactions or staking were affected.
Thats is not to say, we are immune, If the normal operating capacity of a block was 50% or more, this would be more a concern and there could be an impact to the time of confirmation of a transaction.
Suffice to say, the current side effect is, a number of you may have a lot of small transactions sitting in your addresses. I would not be too concerned at this point, and would suggest to let the PoSV staking take care of those in due course (it will take a while to get selected due to the size), or in your next transfer, manually select a few to send them on their way.

Performance of PoSV

One of the things that has interested me for a long time with Reddcoin is how the POS mechanism behaves over time.
PoSV is unique amongst the POS crypto-currencies in the way that the weighting mechanism works, and in the way the stake reward is weighted depending on how long the coins have had to age.
A lot of things can influence the amount for each of your stake rewards,
Working with @deadpool, and @reddibrek, they have been trying to define it is simple to understand terms
But I am also studying the network in much greater detail in relation to a post on the ReddcoinTalk forum regarding PoSV v2.
This was the original statement made about 1 year ago, and I believe there is merit in re-visiting this PoSV v2 proposal. It provides and extra incentive to everyone who continues to stake, and in doing so get a bigger percentage of return.
So in my spare time I have been extracting information about the current network, the blockchain and the metrics of how it is functioning, what returns stakers currently get and whether this remains a viable option.

Getting involved

We are a global community, and cross many borders but boundaries do not need to hinder us.
The crypto currency world has not reached its tipping point yet, but when it does, it is sure to escalate at an amazing rate. There are going to be many ups and downs, and an interesting ride for sure.
If you would like to get involved and dont know where to start, reach out and we will see where you can jump in @Deadpool has a great Trello site going with activities that need looking at.

In Closing

There is still plenty to do, but we are getting closer and I look forward to another productive week.
So where ever you are, enjoy your week ahead
Keep on staking!
x-posted (https://www.reddcointalk.org/topic/839/state-of-the-redd-nation-may-23-2016)
submitted by cryptognasher to reddCoin [link] [comments]

State of the Redd-Nation :: Mar 7, 2016

x-popsted (https://www.reddcointalk.org/topic/785/state-of-the-redd-nation-mar-7-2016)

Weekly Updates

Last Week

Welcome again to another weekly post and update on everything Reddcoin.
For Reddcoin, it has been quite a productive week. I have been able to build out a new release candidate (RC1d) containing all the fixes to the issues raised. This has now been distributed to most of the beta testers.
If you havent received your link yet, let me know (PM)
Outside of Reddcoin, it has been quite turmultuous over the past week particularly as the Bitcoin network has been dealing with high volumes. There has been an increase of small transactions causing blocks to fill and delaying some transactions from actually getting into a block.
Some of this discussion has been centered on the increasing fees of the network and it is becoming expensive to send transaction.

New Wallet - RC1d development update

Last week I spoke about hopefully being able to release a new candidate for for testnet. Time wise i was able to get ahead and managed to push a version out on Saturday 5 March 2016
The new build includes the following improvements
With this release there is an increase in the block version up from version 3 to version 4. Version 3 was originally created for PoSV. The increase to version 4 is required to handle the new DER signature validation.
What this means for the network is we will have some switchover logic. Effectively the following parameters are used
When this occurs version 3 blocks or lower will not be accepted on the network. This is not a hard fork that will suddenly happen, but rather timed so that everyone has time to get versions downloaded and tested (some exchanges and the like will need time to prepare).

Reddheads Website

Reddibrek has been very busy this last few weeks giving the reddheads.com website a freshen up. Here you can subscribe to the newsletter and read some of the pertinent articles being discussed.
If you havent subscribed already, please do to stay informed.

Network Fees

There has been lots of discussion in recent forums about network fees. I have even contributed to the following posting https://www.reddit.com/CryptoCurrency/comments/48zd7t/which_coin_has_the_cheapest_transaction_fees_atm/
In essence Reddcoin tries to keep fees to a reasonable level. We have 3 destinct areas in transactions that effect fees from the QT wallet
  1. Transactions 1RDD or less are considered spam and will attract 0.0001 RDD as a transaction fee. This is to discourage such low value transactions
  2. Transactions that are above 1RDD, and have a size that will cause the block to be < 250KB will be free. That is if there only a small number of inputs or outputs it will be free.
  3. If the transaction will cause the block to be > 250KB will attract increasing fees up to the limit of the block of 1MB
In the case of Reddcoin, fees go back into the network, and anyone with an open and staking wallet is entitled to recieve them and are included in the staking amount.

Contributions you can make

Some discussions have started on what the community can do to help contribute to Reddcoin, when you are not a programmer.
A few things do come to mind
These are just a few suggestions, there are plenty of things that could be improved.

In Closing

This week brings new challenges and I will be focusing back on the ReddID and Browser wallet features. The new build of wallet will be going through its paces this week and hopefully we have most technical issues wrapped up.
Keep on staking!
submitted by cryptognasher to reddCoin [link] [comments]

Facilitating Discussion of 0.9.0 FINAL of Bitcoin Core (aka Bitcoin QT)

To facilitate a detailed discussion of some of the finer points of this update, I added numbering to each bullet in release notes, and also posted it to RapGenius, where people can annotate it if they'd like.
I'm not a programmer, but I'm curious to hear what programmers and other people smarter than me have to say about all the new changes.
http://rapgenius.com/The-bitcoin-dev-team-bitcoin-090-final-lyrics
EDIT1 : Doh! Reddit detroyed all the formatting and now i'm on baby duty so can't fix it. EDIT 2: Nap time! Just fixed the formatting :)
---- 0.9.0 RELEASE NOTES ----
Part 1. RPC:
1.1 - New notion of 'conflicted' transactions, reported as confirmations: -1
1.2 - 'listreceivedbyaddress' now provides tx ids
1.3 - Add raw transaction hex to 'gettransaction' output
1.4 - Updated help and tests for 'getreceivedby(account|address)'
1.5 - In 'getblock', accept 2nd 'verbose' parameter, similar to getrawtransaction, but defaulting to 1 for backward compatibility
1.6 - Add 'verifychain', to verify chain database at runtime
1.7 - Add 'dumpwallet' and 'importwallet' RPCs
1.8 - 'keypoolrefill' gains optional size parameter
1.9 - Add 'getbestblockhash', to return tip of best chain
1.10 - Add 'chainwork' (the total work done by all blocks since the genesis block) to 'getblock' output
1.11 - Make RPC password resistant to timing attacks
1.12 - Clarify help messages and add examples
1.13 - Add 'getrawchangeaddress' call for raw transaction change destinations
1.14 - Reject insanely high fees by default in 'sendrawtransaction'
1.15 - Add RPC call 'decodescript' to decode a hex-encoded transaction script
1.16 - Make 'validateaddress' provide redeemScript
1.17 - Add 'getnetworkhashps' to get the calculated network hashrate
1.18 - New RPC 'ping' command to request ping, new 'pingtime' and 'pingwait' fields in 'getpeerinfo' output
1.19 - Adding new 'addrlocal' field to 'getpeerinfo' output
1.20 - Add verbose boolean to 'getrawmempool'
1.21 - Add rpc command 'getunconfirmedbalance' to obtain total unconfirmed balance
1.22 - Explicitly ensure that wallet is unlocked in importprivkey
1.23 - Add check for valid keys in importprivkey
Part 2. Command-line options:
2.1 - New option: -nospendzeroconfchange to never spend unconfirmed change outputs
2.2 - New option: -zapwallettxes to rebuild the wallet's transaction information
2.3 - Rename option '-tor' to '-onion' to better reflect what it does
2.4 - Add '-disablewallet' mode to let bitcoind run entirely without wallet (when built with wallet)
2.5 - Update default '-rpcsslciphers' to include TLSv1.2
2.6 - make '-logtimestamps' default on and rework help-message
2.7 - RPC client option: '-rpcwait', to wait for server start
2.8 - Remove '-logtodebugger'
2.9 - Allow -noserver with bitcoind
Part 3. Block-chain handling and storage:
3.1 - Update leveldb to 1.15
3.2 - Check for correct genesis (prevent cases where a datadir from the wrong network is accidentally loaded)
3.3 - Allow txindex to be removed and add a reindex dialog
3.4 - Log aborted block database rebuilds
3.5 - Store orphan blocks in serialized form, to save memory
3.6 - Limit the number of orphan blocks in memory to 750
3.7 - Fix non-standard disconnected transactions causing mempool orphans
3.8 - Add a new checkpoint at block 279,000
Part 4. Wallet:
4.1 - Bug fixes and new regression tests to correctly compute the balance of wallets containing double-spent (or mutated) transactions
4.2 - Store key creation time. Calculate whole-wallet birthday
4.3 - Optimize rescan to skip blocks prior to birthday
4.4 - Let user select wallet file with -wallet=foo.dat
4.5 - Consider generated coins mature at 101 instead of 120 blocks
4.6 - Improve wallet load time
4.7 - Don't count txins for priority to encourage sweeping
4.8 - Don't create empty transactions when reading a corrupted wallet
4.9 - Fix rescan to start from beginning after importprivkey
4.10 - Only create signatures with low S values
Part 5. Mining:
5.1 - Increase default -blockmaxsize/prioritysize to 750K/50K
5.2 - 'getblocktemplate' does not require a key to create a block template
5.3 - Mining code fee policy now matches relay fee policy
Part 6. Protocol and network:
6.1 - Drop the fee required to relay a transaction to 0.01mBTC per kilobyte
6.2 - Send tx relay flag with version
6.3 - New 'reject' P2P message (BIP 0061, see https://gist.github.com/gavinandresen/7079034 for draft)
6.4 - Dump addresses every 15 minutes instead of 10 seconds
6.5 - Relay OP_RETURN data TxOut as standard transaction type
6.6 - Remove CENT-output free transaction rule when relaying
6.7 - Lower maximum size for free transaction creation
6.8 - Send multiple inv messages if mempool.size > MAX_INV_SZ
6.9 - Split MIN_PROTO_VERSION into INIT_PROTO_VERSION and MIN_PEER_PROTO_VERSION
6.10 - Do not treat fFromMe transaction differently when broadcasting
6.11 - Process received messages one at a time without sleeping between messages
6.12 - Improve logging of failed connections
6.13 - Bump protocol version to 70002
6.14 - Add some additional logging to give extra network insight
6.15 - Added new DNS seed from bitcoinstats.com
Part 7. Validation:
7.1 - Log reason for non-standard transaction rejection
7.2 - Prune provably-unspendable outputs, and adapt consistency check for it
7.3 - Detect any sufficiently long fork and add a warning
7.4 - Call the -alertnotify script when we see a long or invalid fork
7.5 - Fix multi-block reorg transaction resurrection
7.6 - Reject non-canonically-encoded serialization sizes
7.7 - Reject dust amounts during validation
7.8 - Accept nLockTime transactions that finalize in the next block
Part 8. Build system:
8.1 - Switch to autotools-based build system
8.2 - Build without wallet by passing --disable-wallet to configure, this removes the BerkeleyDB dependency
8.3 - Upgrade gitian dependencies (libpng, libz, libupnpc, boost, openssl) to more recent versions
8.4 - Windows 64-bit build support
8.5 - Solaris compatibility fixes
8.6 - Check integrity of gitian input source tarballs
8.7 - Enable full GCC Stack-smashing protection for all OSes
Part 9. GUI:
9.1 - Switch to Qt 5.2.0 for Windows build
9.2 - Add payment request (BIP 0070) support
9.3 - Improve options dialog
9.4 - Show transaction fee in new send confirmation dialog
9.5 - Add total balance in overview page
9.6 - Allow user to choose data directory on first start, when data directory ismissing, or when the -choosedatadir option is passed
9.7 - Save and restore window positions
9.8 - Add vout index to transaction id in transactions details dialog
9.9 - Add network traffic graph in debug window
9.10 - Add open URI dialog
9.11 - Add Coin Control Features
9.12 - Improve receive coins workflow: make the 'Receive' tab into a form to request payments, and move historical address list functionality to File menu
9.13 - Rebrand to Bitcoin Core
9.14 - Move initialization/shutdown to a thread. This prevents "Not responding" messages during startup. Also show a window during shutdown
9.15 - Don't regenerate autostart link on every client startup
9.16 - Show and store message of normal bitcoin:URI
9.17 - Fix richtext detection hang issue on very old Qt versions
9.18 - OS X: Make use of the 10.8+ user notification center to display Growl-like notifications
9.19 - OS X: Added NSHighResolutionCapable flag to Info.plist for better font rendering on Retina displays
9.20 - OS X: Fix bitcoin-qt startup crash when clicking dock icon
9.21 - Linux: Fix Gnome bitcoin: URI handler
Part 10. Miscellaneous:
10.1 - Add Linux script (contrib/qos/tc.sh) to limit outgoing bandwidth
10.2 - Add '-regtest' mode, similar to testnet but private with instant block generation with 'setgenerate' RPC
10.3 - Add 'linearize.py' script to contrib, for creating bootstrap.dat
10.4 - Add separate bitcoin-cli client
submitted by WhiteyFisk to Bitcoin [link] [comments]

Bitcoin Core 0.10.0 released | Wladimir | Feb 16 2015

Wladimir on Feb 16 2015:
Bitcoin Core version 0.10.0 is now available from:
https://bitcoin.org/bin/0.10.0/
This is a new major version release, bringing both new features and
bug fixes.
Please report bugs using the issue tracker at github:
https://github.com/bitcoin/bitcoin/issues
The whole distribution is also available as torrent:
https://bitcoin.org/bin/0.10.0/bitcoin-0.10.0.torrent
magnet:?xt=urn:btih:170c61fe09dafecfbb97cb4dccd32173383f4e68&dn;=0.10.0&tr;=udp%3A%2F%2Ftracker.openbittorrent.com%3A80%2Fannounce&tr;=udp%3A%2F%2Ftracker.publicbt.com%3A80%2Fannounce&tr;=udp%3A%2F%2Ftracker.ccc.de%3A80%2Fannounce&tr;=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969&tr;=udp%3A%2F%2Fopen.demonii.com%3A1337&ws;=https%3A%2F%2Fbitcoin.org%2Fbin%2F
Upgrading and downgrading

How to Upgrade
If you are running an older version, shut it down. Wait until it has completely
shut down (which might take a few minutes for older versions), then run the
installer (on Windows) or just copy over /Applications/Bitcoin-Qt (on Mac) or
bitcoind/bitcoin-qt (on Linux).
Downgrading warning
Because release 0.10.0 makes use of headers-first synchronization and parallel
block download (see further), the block files and databases are not
backwards-compatible with older versions of Bitcoin Core or other software:
  • Blocks will be stored on disk out of order (in the order they are
received, really), which makes it incompatible with some tools or
other programs. Reindexing using earlier versions will also not work
anymore as a result of this.
  • The block index database will now hold headers for which no block is
stored on disk, which earlier versions won't support.
If you want to be able to downgrade smoothly, make a backup of your entire data
directory. Without this your node will need start syncing (or importing from
bootstrap.dat) anew afterwards. It is possible that the data from a completely
synchronised 0.10 node may be usable in older versions as-is, but this is not
supported and may break as soon as the older version attempts to reindex.
This does not affect wallet forward or backward compatibility.
Notable changes

Faster synchronization
Bitcoin Core now uses 'headers-first synchronization'. This means that we first
ask peers for block headers (a total of 27 megabytes, as of December 2014) and
validate those. In a second stage, when the headers have been discovered, we
download the blocks. However, as we already know about the whole chain in
advance, the blocks can be downloaded in parallel from all available peers.
In practice, this means a much faster and more robust synchronization. On
recent hardware with a decent network link, it can be as little as 3 hours
for an initial full synchronization. You may notice a slower progress in the
very first few minutes, when headers are still being fetched and verified, but
it should gain speed afterwards.
A few RPCs were added/updated as a result of this:
  • getblockchaininfo now returns the number of validated headers in addition to
the number of validated blocks.
  • getpeerinfo lists both the number of blocks and headers we know we have in
common with each peer. While synchronizing, the heights of the blocks that we
have requested from peers (but haven't received yet) are also listed as
'inflight'.
  • A new RPC getchaintips lists all known branches of the block chain,
including those we only have headers for.
Transaction fee changes
This release automatically estimates how high a transaction fee (or how
high a priority) transactions require to be confirmed quickly. The default
settings will create transactions that confirm quickly; see the new
'txconfirmtarget' setting to control the tradeoff between fees and
confirmation times. Fees are added by default unless the 'sendfreetransactions'
setting is enabled.
Prior releases used hard-coded fees (and priorities), and would
sometimes create transactions that took a very long time to confirm.
Statistics used to estimate fees and priorities are saved in the
data directory in the fee_estimates.dat file just before
program shutdown, and are read in at startup.
New command line options for transaction fee changes:
  • -txconfirmtarget=n : create transactions that have enough fees (or priority)
so they are likely to begin confirmation within n blocks (default: 1). This setting
is over-ridden by the -paytxfee option.
  • -sendfreetransactions : Send transactions as zero-fee transactions if possible
(default: 0)
New RPC commands for fee estimation:
  • estimatefee nblocks : Returns approximate fee-per-1,000-bytes needed for
a transaction to begin confirmation within nblocks. Returns -1 if not enough
transactions have been observed to compute a good estimate.
  • estimatepriority nblocks : Returns approximate priority needed for
a zero-fee transaction to begin confirmation within nblocks. Returns -1 if not
enough free transactions have been observed to compute a good
estimate.
RPC access control changes
Subnet matching for the purpose of access control is now done
by matching the binary network address, instead of with string wildcard matching.
For the user this means that -rpcallowip takes a subnet specification, which can be
  • a single IP address (e.g. 1.2.3.4 or fe80::0012:3456:789a:bcde)
  • a network/CIDR (e.g. 1.2.3.0/24 or fe80::0000/64)
  • a network/netmask (e.g. 1.2.3.4/255.255.255.0 or fe80::0012:3456:789a:bcde/ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff)
An arbitrary number of -rpcallow arguments can be given. An incoming connection will be accepted if its origin address
matches one of them.
For example:
| 0.9.x and before | 0.10.x |
|--------------------------------------------|---------------------------------------|
| -rpcallowip=192.168.1.1 | -rpcallowip=192.168.1.1 (unchanged) |
| -rpcallowip=192.168.1.* | -rpcallowip=192.168.1.0/24 |
| -rpcallowip=192.168.* | -rpcallowip=192.168.0.0/16 |
| -rpcallowip=* (dangerous!) | -rpcallowip=::/0 (still dangerous!) |
Using wildcards will result in the rule being rejected with the following error in debug.log:
 Error: Invalid -rpcallowip subnet specification: *. Valid are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). 
REST interface
A new HTTP API is exposed when running with the -rest flag, which allows
unauthenticated access to public node data.
It is served on the same port as RPC, but does not need a password, and uses
plain HTTP instead of JSON-RPC.
Assuming a local RPC server running on port 8332, it is possible to request:
In every case, EXT can be bin (for raw binary data), hex (for hex-encoded
binary) or json.
For more details, see the doc/REST-interface.md document in the repository.
RPC Server "Warm-Up" Mode
The RPC server is started earlier now, before most of the expensive
intialisations like loading the block index. It is available now almost
immediately after starting the process. However, until all initialisations
are done, it always returns an immediate error with code -28 to all calls.
This new behaviour can be useful for clients to know that a server is already
started and will be available soon (for instance, so that they do not
have to start it themselves).
Improved signing security
For 0.10 the security of signing against unusual attacks has been
improved by making the signatures constant time and deterministic.
This change is a result of switching signing to use libsecp256k1
instead of OpenSSL. Libsecp256k1 is a cryptographic library
optimized for the curve Bitcoin uses which was created by Bitcoin
Core developer Pieter Wuille.
There exist attacks[1] against most ECC implementations where an
attacker on shared virtual machine hardware could extract a private
key if they could cause a target to sign using the same key hundreds
of times. While using shared hosts and reusing keys are inadvisable
for other reasons, it's a better practice to avoid the exposure.
OpenSSL has code in their source repository for derandomization
and reduction in timing leaks that we've eagerly wanted to use for a
long time, but this functionality has still not made its
way into a released version of OpenSSL. Libsecp256k1 achieves
significantly stronger protection: As far as we're aware this is
the only deployed implementation of constant time signing for
the curve Bitcoin uses and we have reason to believe that
libsecp256k1 is better tested and more thoroughly reviewed
than the implementation in OpenSSL.
[1] https://eprint.iacr.org/2014/161.pdf
Watch-only wallet support
The wallet can now track transactions to and from wallets for which you know
all addresses (or scripts), even without the private keys.
This can be used to track payments without needing the private keys online on a
possibly vulnerable system. In addition, it can help for (manual) construction
of multisig transactions where you are only one of the signers.
One new RPC, importaddress, is added which functions similarly to
importprivkey, but instead takes an address or script (in hexadecimal) as
argument. After using it, outputs credited to this address or script are
considered to be received, and transactions consuming these outputs will be
considered to be sent.
The following RPCs have optional support for watch-only:
getbalance, listreceivedbyaddress, listreceivedbyaccount,
listtransactions, listaccounts, listsinceblock, gettransaction. See the
RPC documentation for those methods for more information.
Compared to using getrawtransaction, this mechanism does not require
-txindex, scales better, integrates better with the wallet, and is compatible
with future block chain pruning functionality. It does mean that all relevant
addresses need to added to the wallet before the payment, though.
Consensus library
Starting from 0.10.0, the Bitcoin Core distribution includes a consensus library.
The purpose of this library is to make the verification functionality that is
critical to Bitcoin's consensus available to other applications, e.g. to language
bindings such as [python-bitcoinlib](https://pypi.python.org/pypi/python-bitcoinlib) or
alternative node implementations.
This library is called libbitcoinconsensus.so (or, .dll for Windows).
Its interface is defined in the C header [bitcoinconsensus.h](https://github.com/bitcoin/bitcoin/blob/0.10/src/script/bitcoinconsensus.h).
In its initial version the API includes two functions:
  • bitcoinconsensus_verify_script verifies a script. It returns whether the indicated input of the provided serialized transaction
correctly spends the passed scriptPubKey under additional constraints indicated by flags
  • bitcoinconsensus_version returns the API version, currently at an experimental 0
The functionality is planned to be extended to e.g. UTXO management in upcoming releases, but the interface
for existing methods should remain stable.
Standard script rules relaxed for P2SH addresses
The IsStandard() rules have been almost completely removed for P2SH
redemption scripts, allowing applications to make use of any valid
script type, such as "n-of-m OR y", hash-locked oracle addresses, etc.
While the Bitcoin protocol has always supported these types of script,
actually using them on mainnet has been previously inconvenient as
standard Bitcoin Core nodes wouldn't relay them to miners, nor would
most miners include them in blocks they mined.
bitcoin-tx
It has been observed that many of the RPC functions offered by bitcoind are
"pure functions", and operate independently of the bitcoind wallet. This
included many of the RPC "raw transaction" API functions, such as
createrawtransaction.
bitcoin-tx is a newly introduced command line utility designed to enable easy
manipulation of bitcoin transactions. A summary of its operation may be
obtained via "bitcoin-tx --help" Transactions may be created or signed in a
manner similar to the RPC raw tx API. Transactions may be updated, deleting
inputs or outputs, or appending new inputs and outputs. Custom scripts may be
easily composed using a simple text notation, borrowed from the bitcoin test
suite.
This tool may be used for experimenting with new transaction types, signing
multi-party transactions, and many other uses. Long term, the goal is to
deprecate and remove "pure function" RPC API calls, as those do not require a
server round-trip to execute.
Other utilities "bitcoin-key" and "bitcoin-script" have been proposed, making
key and script operations easily accessible via command line.
Mining and relay policy enhancements
Bitcoin Core's block templates are now for version 3 blocks only, and any mining
software relying on its getblocktemplate must be updated in parallel to use
libblkmaker either version 0.4.2 or any version from 0.5.1 onward.
If you are solo mining, this will affect you the moment you upgrade Bitcoin
Core, which must be done prior to BIP66 achieving its 951/1001 status.
If you are mining with the stratum mining protocol: this does not affect you.
If you are mining with the getblocktemplate protocol to a pool: this will affect
you at the pool operator's discretion, which must be no later than BIP66
achieving its 951/1001 status.
The prioritisetransaction RPC method has been added to enable miners to
manipulate the priority of transactions on an individual basis.
Bitcoin Core now supports BIP 22 long polling, so mining software can be
notified immediately of new templates rather than having to poll periodically.
Support for BIP 23 block proposals is now available in Bitcoin Core's
getblocktemplate method. This enables miners to check the basic validity of
their next block before expending work on it, reducing risks of accidental
hardforks or mining invalid blocks.
Two new options to control mining policy:
  • -datacarrier=0/1 : Relay and mine "data carrier" (OP_RETURN) transactions
if this is 1.
  • -datacarriersize=n : Maximum size, in bytes, we consider acceptable for
"data carrier" outputs.
The relay policy has changed to more properly implement the desired behavior of not
relaying free (or very low fee) transactions unless they have a priority above the
AllowFreeThreshold(), in which case they are relayed subject to the rate limiter.
BIP 66: strict DER encoding for signatures
Bitcoin Core 0.10 implements BIP 66, which introduces block version 3, and a new
consensus rule, which prohibits non-DER signatures. Such transactions have been
non-standard since Bitcoin v0.8.0 (released in February 2013), but were
technically still permitted inside blocks.
This change breaks the dependency on OpenSSL's signature parsing, and is
required if implementations would want to remove all of OpenSSL from the
consensus code.
The same miner-voting mechanism as in BIP 34 is used: when 751 out of a
sequence of 1001 blocks have version number 3 or higher, the new consensus
rule becomes active for those blocks. When 951 out of a sequence of 1001
blocks have version number 3 or higher, it becomes mandatory for all blocks.
Backward compatibility with current mining software is NOT provided, thus miners
should read the first paragraph of "Mining and relay policy enhancements" above.
0.10.0 Change log

Detailed release notes follow. This overview includes changes that affect external
behavior, not code moves, refactors or string updates.
RPC:
  • f923c07 Support IPv6 lookup in bitcoin-cli even when IPv6 only bound on localhost
  • b641c9c Fix addnode "onetry": Connect with OpenNetworkConnection
  • 171ca77 estimatefee / estimatepriority RPC methods
  • b750cf1 Remove cli functionality from bitcoind
  • f6984e8 Add "chain" to getmininginfo, improve help in getblockchaininfo
  • 99ddc6c Add nLocalServices info to RPC getinfo
  • cf0c47b Remove getwork() RPC call
  • 2a72d45 prioritisetransaction
  • e44fea5 Add an option -datacarrier to allow users to disable relaying/mining data carrier transactions
  • 2ec5a3d Prevent easy RPC memory exhaustion attack
  • d4640d7 Added argument to getbalance to include watchonly addresses and fixed errors in balance calculation
  • 83f3543 Added argument to listaccounts to include watchonly addresses
  • 952877e Showing 'involvesWatchonly' property for transactions returned by 'listtransactions' and 'listsinceblock'. It is only appended when the transaction involves a watchonly address
  • d7d5d23 Added argument to listtransactions and listsinceblock to include watchonly addresses
  • f87ba3d added includeWatchonly argument to 'gettransaction' because it affects balance calculation
  • 0fa2f88 added includedWatchonly argument to listreceivedbyaddress/...account
  • 6c37f7f getrawchangeaddress: fail when keypool exhausted and wallet locked
  • ff6a7af getblocktemplate: longpolling support
  • c4a321f Add peerid to getpeerinfo to allow correlation with the logs
  • 1b4568c Add vout to ListTransactions output
  • b33bd7a Implement "getchaintips" RPC command to monitor blockchain forks
  • 733177e Remove size limit in RPC client, keep it in server
  • 6b5b7cb Categorize rpc help overview
  • 6f2c26a Closely track mempool byte total. Add "getmempoolinfo" RPC
  • aa82795 Add detailed network info to getnetworkinfo RPC
  • 01094bd Don't reveal whether password is <20 or >20 characters in RPC
  • 57153d4 rpc: Compute number of confirmations of a block from block height
  • ff36cbe getnetworkinfo: export local node's client sub-version string
  • d14d7de SanitizeString: allow '(' and ')'
  • 31d6390 Fixed setaccount accepting foreign address
  • b5ec5fe update getnetworkinfo help with subversion
  • ad6e601 RPC additions after headers-first
  • 33dfbf5 rpc: Fix leveldb iterator leak, and flush before gettxoutsetinfo
  • 2aa6329 Enable customising node policy for datacarrier data size with a -datacarriersize option
  • f877aaa submitblock: Use a temporary CValidationState to determine accurately the outcome of ProcessBlock
  • e69a587 submitblock: Support for returning specific rejection reasons
  • af82884 Add "warmup mode" for RPC server
  • e2655e0 Add unauthenticated HTTP REST interface to public blockchain data
  • 683dc40 Disable SSLv3 (in favor of TLS) for the RPC client and server
  • 44b4c0d signrawtransaction: validate private key
  • 9765a50 Implement BIP 23 Block Proposal
  • f9de17e Add warning comment to getinfo
Command-line options:
  • ee21912 Use netmasks instead of wildcards for IP address matching
  • deb3572 Add -rpcbind option to allow binding RPC port on a specific interface
  • 96b733e Add -version option to get just the version
  • 1569353 Add -stopafterblockimport option
  • 77cbd46 Let -zapwallettxes recover transaction meta data
  • 1c750db remove -tor compatibility code (only allow -onion)
  • 4aaa017 rework help messages for fee-related options
  • 4278b1d Clarify error message when invalid -rpcallowip
  • 6b407e4 -datadir is now allowed in config files
  • bdd5b58 Add option -sysperms to disable 077 umask (create new files with system default umask)
  • cbe39a3 Add "bitcoin-tx" command line utility and supporting modules
  • dbca89b Trigger -alertnotify if network is upgrading without you
  • ad96e7c Make -reindex cope with out-of-order blocks
  • 16d5194 Skip reindexed blocks individually
  • ec01243 --tracerpc option for regression tests
  • f654f00 Change -genproclimit default to 1
  • 3c77714 Make -proxy set all network types, avoiding a connect leak
  • 57be955 Remove -printblock, -printblocktree, and -printblockindex
  • ad3d208 remove -maxorphanblocks config parameter since it is no longer functional
Block and transaction handling:
  • 7a0e84d ProcessGetData(): abort if a block file is missing from disk
  • 8c93bf4 LoadBlockIndexDB(): Require block db reindex if any blk*.dat files are missing
  • 77339e5 Get rid of the static chainMostWork (optimization)
  • 4e0eed8 Allow ActivateBestChain to release its lock on cs_main
  • 18e7216 Push cs_mains down in ProcessBlock
  • fa126ef Avoid undefined behavior using CFlatData in CScript serialization
  • 7f3b4e9 Relax IsStandard rules for pay-to-script-hash transactions
  • c9a0918 Add a skiplist to the CBlockIndex structure
  • bc42503 Use unordered_map for CCoinsViewCache with salted hash (optimization)
  • d4d3fbd Do not flush the cache after every block outside of IBD (optimization)
  • ad08d0b Bugfix: make CCoinsViewMemPool support pruned entries in underlying cache
  • 5734d4d Only remove actualy failed blocks from setBlockIndexValid
  • d70bc52 Rework block processing benchmark code
  • 714a3e6 Only keep setBlockIndexValid entries that are possible improvements
  • ea100c7 Reduce maximum coinscache size during verification (reduce memory usage)
  • 4fad8e6 Reject transactions with excessive numbers of sigops
  • b0875eb Allow BatchWrite to destroy its input, reducing copying (optimization)
  • 92bb6f2 Bypass reloading blocks from disk (optimization)
  • 2e28031 Perform CVerifyDB on pcoinsdbview instead of pcoinsTip (reduce memory usage)
  • ab15b2e Avoid copying undo data (optimization)
  • 341735e Headers-first synchronization
  • afc32c5 Fix rebuild-chainstate feature and improve its performance
  • e11b2ce Fix large reorgs
  • ed6d1a2 Keep information about all block files in memory
  • a48f2d6 Abstract context-dependent block checking from acceptance
  • 7e615f5 Fixed mempool sync after sending a transaction
  • 51ce901 Improve chainstate/blockindex disk writing policy
  • a206950 Introduce separate flushing modes
  • 9ec75c5 Add a locking mechanism to IsInitialBlockDownload to ensure it never goes from false to true
  • 868d041 Remove coinbase-dependant transactions during reorg
  • 723d12c Remove txn which are invalidated by coinbase maturity during reorg
  • 0cb8763 Check against MANDATORY flags prior to accepting to mempool
  • 8446262 Reject headers that build on an invalid parent
  • 008138c Bugfix: only track UTXO modification after lookup
P2P protocol and network code:
  • f80cffa Do not trigger a DoS ban if SCRIPT_VERIFY_NULLDUMMY fails
  • c30329a Add testnet DNS seed of Alex Kotenko
  • 45a4baf Add testnet DNS seed of Andreas Schildbach
  • f1920e8 Ping automatically every 2 minutes (unconditionally)
  • 806fd19 Allocate receive buffers in on the fly
  • 6ecf3ed Display unknown commands received
  • aa81564 Track peers' available blocks
  • caf6150 Use async name resolving to improve net thread responsiveness
  • 9f4da19 Use pong receive time rather than processing time
  • 0127a9b remove SOCKS4 support from core and GUI, use SOCKS5
  • 40f5cb8 Send rejects and apply DoS scoring for errors in direct block validation
  • dc942e6 Introduce whitelisted peers
  • c994d2e prevent SOCKET leak in BindListenPort()
  • a60120e Add built-in seeds for .onion
  • 60dc8e4 Allow -onlynet=onion to be used
  • 3a56de7 addrman: Do not propagate obviously poor addresses onto the network
  • 6050ab6 netbase: Make SOCKS5 negotiation interruptible
  • 604ee2a Remove tx from AlreadyAskedFor list once we receive it, not when we process it
  • efad808 Avoid reject message feedback loops
  • 71697f9 Separate protocol versioning from clientversion
  • 20a5f61 Don't relay alerts to peers before version negotiation
  • b4ee0bd Introduce preferred download peers
  • 845c86d Do not use third party services for IP detection
  • 12a49ca Limit the number of new addressses to accumulate
  • 35e408f Regard connection failures as attempt for addrman
  • a3a7317 Introduce 10 minute block download timeout
  • 3022e7d Require sufficent priority for relay of free transactions
  • 58fda4d Update seed IPs, based on bitcoin.sipa.be crawler data
  • 18021d0 Remove bitnodes.io from dnsseeds.
Validation:
  • 6fd7ef2 Also switch the (unused) verification code to low-s instead of even-s
  • 584a358 Do merkle root and txid duplicates check simultaneously
  • 217a5c9 When transaction outputs exceed inputs, show the offending amounts so as to aid debugging
  • f74fc9b Print input index when signature validation fails, to aid debugging
  • 6fd59ee script.h: set_vch() should shift a >32 bit value
  • d752ba8 Add SCRIPT_VERIFY_SIGPUSHONLY (BIP62 rule 2) (test only)
  • 698c6ab Add SCRIPT_VERIFY_MINIMALDATA (BIP62 rules 3 and 4) (test only)
  • ab9edbd script: create sane error return codes for script validation and remove logging
  • 219a147 script: check ScriptError values in script tests
  • 0391423 Discourage NOPs reserved for soft-fork upgrades
  • 98b135f Make STRICTENC invalid pubkeys fail the script rather than the opcode
  • 307f7d4 Report script evaluation failures in log and reject messages
  • ace39db consensus: guard against openssl's new strict DER checks
  • 12b7c44 Improve robustness of DER recoding code
  • 76ce5c8 fail immediately on an empty signature
Build system:
  • f25e3ad Fix build in OS X 10.9
  • 65e8ba4 build: Switch to non-recursive make
  • 460b32d build: fix broken boost chrono check on some platforms
  • 9ce0774 build: Fix windows configure when using --with-qt-libdir
  • ea96475 build: Add mention of --disable-wallet to bdb48 error messages
  • 1dec09b depends: add shared dependency builder
  • c101c76 build: Add --with-utils (bitcoin-cli and bitcoin-tx, default=yes). Help string consistency tweaks. Target sanity check fix
  • e432a5f build: add option for reducing exports (v2)
  • 6134b43 Fixing condition 'sabotaging' MSVC build
  • af0bd5e osx: fix signing to make Gatekeeper happy (again)
  • a7d1f03 build: fix dynamic boost check when --with-boost= is used
  • d5fd094 build: fix qt test build when libprotobuf is in a non-standard path
  • 2cf5f16 Add libbitcoinconsensus library
  • 914868a build: add a deterministic dmg signer
  • 2d375fe depends: bump openssl to 1.0.1k
  • b7a4ecc Build: Only check for boost when building code that requires it
Wallet:
  • b33d1f5 Use fee/priority estimates in wallet CreateTransaction
  • 4b7b1bb Sanity checks for estimates
  • c898846 Add support for watch-only addresses
  • d5087d1 Use script matching rather than destination matching for watch-only
  • d88af56 Fee fixes
  • a35b55b Dont run full check every time we decrypt wallet
  • 3a7c348 Fix make_change to not create half-satoshis
  • f606bb9 fix a possible memory leak in CWalletDB::Recover
  • 870da77 fix possible memory leaks in CWallet::EncryptWallet
  • ccca27a Watch-only fixes
  • 9b1627d [Wallet] Reduce minTxFee for transaction creation to 1000 satoshis
  • a53fd41 Deterministic signing
  • 15ad0b5 Apply AreSane() checks to the fees from the network
  • 11855c1 Enforce minRelayTxFee on wallet created tx and add a maxtxfee option
GUI:
  • c21c74b osx: Fix missing dock menu with qt5
  • b90711c Fix Transaction details shows wrong To:
  • 516053c Make links in 'About Bitcoin Core' clickable
  • bdc83e8 Ensure payment request network matches client network
  • 65f78a1 Add GUI view of peer information
  • 06a91d9 VerifyDB progress reporting
  • fe6bff2 Add BerkeleyDB version info to RPCConsole
  • b917555 PeerTableModel: Fix potential deadlock. #4296
  • dff0e3b Improve rpc console history behavior
  • 95a9383 Remove CENT-fee-rule from coin control completely
  • 56b07d2 Allow setting listen via GUI
  • d95ba75 Log messages with type>QtDebugMsg as non-debug
  • 8969828 New status bar Unit Display Control and related changes
  • 674c070 seed OpenSSL PNRG with Windows event data
  • 509f926 Payment request parsing on startup now only changes network if a valid network name is specified
  • acd432b Prevent balloon-spam after rescan
  • 7007402 Implement SI-style (thin space) thoudands separator
  • 91cce17 Use fixed-point arithmetic in amount spinbox
  • bdba2dd Remove an obscure option no-one cares about
  • bd0aa10 Replace the temporary file hack currently used to change Bitcoin-Qt's dock icon (OS X) with a buffer-based solution
  • 94e1b9e Re-work overviewpage UI
  • 8bfdc9a Better looking trayicon
  • b197bf3 disable tray interactions when client model set to 0
  • 1c5f0af Add column Watch-only to transactions list
  • 21f139b Fix tablet crash. closes #4854
  • e84843c Broken addresses on command line no longer trigger testnet
  • a49f11d Change splash screen to normal window
  • 1f9be98 Disable App Nap on OSX 10.9+
  • 27c3e91 Add proxy to options overridden if necessary
  • 4bd1185 Allow "emergency" shutdown during startup
  • d52f072 Don't show wallet options in the preferences menu when running with -disablewallet
  • 6093aa1 Qt: QProgressBar CPU-Issue workaround
  • 0ed9675 [Wallet] Add global boolean whether to send free transactions (default=true)
  • ed3e5e4 [Wallet] Add global boolean whether to pay at least the custom fee (default=true)
  • e7876b2 [Wallet] Prevent user from paying a non-sense fee
  • c1c9d5b Add Smartfee to GUI
  • e0a25c5 Make askpassphrase dialog behave more sanely
  • 94b362d On close of splashscreen interrupt verifyDB
  • b790d13 English translation update
  • 8543b0d Correct tooltip on address book page
Tests:
  • b41e594 Fix script test handling of empty scripts
  • d3a33fc Test CHECKMULTISIG with m == 0 and n == 0
  • 29c1749 Let tx (in)valid tests use any SCRIPT_VERIFY flag
  • 6380180 Add rejection of non-null CHECKMULTISIG dummy values
  • 21bf3d2 Add tests for BoostAsioToCNetAddr
  • b5ad5e7 Add Python test for -rpcbind and -rpcallowip
  • 9ec0306 Add CODESEPARATOFindAndDelete() tests
  • 75ebced Added many rpc wallet tests
  • 0193fb8 Allow multiple regression tests to run at once
  • 92a6220 Hook up sanity checks
  • 3820e01 Extend and move all crypto tests to crypto_tests.cpp
  • 3f9a019 added list/get received by address/ account tests
  • a90689f Remove timing-based signature cache unit test
  • 236982c Add skiplist unit tests
  • f4b00be Add CChain::GetLocator() unit test
  • b45a6e8 Add test for getblocktemplate longpolling
  • cdf305e Set -discover=0 in regtest framework
  • ed02282 additional test for OP_SIZE in script_valid.json
  • 0072d98 script tests: BOOLAND, BOOLOR decode to integer
  • 833ff16 script tests: values that overflow to 0 are true
  • 4cac5db script tests: value with trailing 0x00 is true
  • 89101c6 script test: test case for 5-byte bools
  • d2d9dc0 script tests: add tests for CHECKMULTISIG limits
  • d789386 Add "it works" test for bitcoin-tx
  • df4d61e Add bitcoin-tx tests
  • aa41ac2 Test IsPushOnly() with invalid push
  • 6022b5d Make script_{valid,invalid}.json validation flags configurable
  • 8138cbe Add automatic script test generation, and actual checksig tests
  • ed27e53 Add coins_tests with a large randomized CCoinViewCache test
  • 9df9cf5 Make SCRIPT_VERIFY_STRICTENC compatible with BIP62
  • dcb9846 Extend getchaintips RPC test
  • 554147a Ensure MINIMALDATA invalid tests can only fail one way
  • dfeec18 Test every numeric-accepting opcode for correct handling of the numeric minimal encoding rule
  • 2b62e17 Clearly separate PUSHDATA and numeric argument MINIMALDATA tests
  • 16d78bd Add valid invert of invalid every numeric opcode tests
  • f635269 tests: enable alertnotify test for Windows
  • 7a41614 tests: allow rpc-tests to get filenames for bitcoind and bitcoin-cli from the environment
  • 5122ea7 tests: fix forknotify.py on windows
  • fa7f8cd tests: remove old pull-tester scripts
  • 7667850 tests: replace the old (unused since Travis) tests with new rpc test scripts
  • f4e0aef Do signature-s negation inside the tests
  • 1837987 Optimize -regtest setgenerate block generation
  • 2db4c8a Fix node ranges in the test framework
  • a8b2ce5 regression test only setmocktime RPC call
  • daf03e7 RPC tests: create initial chain with specific timestamps
  • 8656dbb Port/fix txnmall.sh regression test
  • ca81587 Test the exact order of CHECKMULTISIG sig/pubkey evaluation
  • 7357893 Prioritize and display -testsafemode status in UI
  • f321d6b Add key generation/verification to ECC sanity check
  • 132ea9b miner_tests: Disable checkpoints so they don't fail the subsidy-change test
  • bc6cb41 QA RPC tests: Add tests block block proposals
  • f67a9ce Use deterministically generated script tests
  • 11d7a7d [RPC] add rpc-test for http keep-alive (persistent connections)
  • 34318d7 RPC-test based on invalidateblock for mempool coinbase spends
  • 76ec867 Use actually valid transactions for script tests
  • c8589bf Add actual signature tests
  • e2677d7 Fix smartfees test for change to relay policy
  • 263b65e tests: run sanity checks in tests too
Miscellaneous:
  • 122549f Fix incorrect checkpoint data for testnet3
  • 5bd02cf Log used config file to debug.log on startup
  • 68ba85f Updated Debian example bitcoin.conf with config from wiki + removed some cruft and updated comments
  • e5ee8f0 Remove -beta suffix
  • 38405ac Add comment regarding experimental-use service bits
  • be873f6 Issue warning if collecting RandSeed data failed
  • 8ae973c Allocate more space if necessary in RandSeedAddPerfMon
  • 675bcd5 Correct comment for 15-of-15 p2sh script size
  • fda3fed libsecp256k1 integration
  • 2e36866 Show nodeid instead of addresses in log (for anonymity) unless otherwise requested
  • cd01a5e Enable paranoid corruption checks in LevelDB >= 1.16
  • 9365937 Add comment about never updating nTimeOffset past 199 samples
  • 403c1bf contrib: remove getwork-based pyminer (as getwork API call has been removed)
  • 0c3e101 contrib: Added systemd .service file in order to help distributions integrate bitcoind
  • 0a0878d doc: Add new DNSseed policy
  • 2887bff Update coding style and add .clang-format
  • 5cbda4f Changed LevelDB cursors to use scoped pointers to ensure destruction when going out of scope
  • b4a72a7 contrib/linearize: split output files based on new-timestamp-year or max-file-size
  • e982b57 Use explicit fflush() instead of setvbuf()
  • 234bfbf contrib: Add init scripts and docs for Upstart and OpenRC
  • 01c2807 Add warning about the merkle-tree algorithm duplicate txid flaw
  • d6712db Also create pid file in non-daemon mode
  • 772ab0e contrib: use batched JSON-RPC in linarize-hashes (optimization)
  • 7ab4358 Update bash-completion for v0.10
  • 6e6a36c contrib: show pull # in prompt for github-merge script
  • 5b9f842 Upgrade leveldb to 1.18, make chainstate databases compatible between ARM and x86 (issue #2293)
  • 4e7c219 Catch UTXO set read errors and shutdown
  • 867c600 Catch LevelDB errors during flush
  • 06ca065 Fix CScriptID(const CScript& in) in empty script case
Credits

Thanks to everyone who contributed to this release:
  • 21E14
  • Adam Weiss
  • Aitor Pazos
  • Alexander Jeng
  • Alex Morcos
  • Alon Muroch
  • Andreas Schildbach
  • Andrew Poelstra
  • Andy Alness
  • Ashley Holman
  • Benedict Chan
  • Ben Holden-Crowther
  • Bryan Bishop
  • BtcDrak
  • Christian von Roques
  • Clinton Christian
  • Cory Fields
  • Cozz Lovan
  • daniel
  • Daniel Kraft
  • David Hill
  • Derek701
  • dexX7
  • dllud
  • Dominyk Tiller
  • Doug
  • elichai
  • elkingtowa
  • ENikS
  • Eric Shaw
  • Federico Bond
  • Francis GASCHET
  • Gavin Andresen
  • Giuseppe Mazzotta
  • Glenn Willen
  • Gregory Maxwell
  • gubatron
  • HarryWu
  • himynameismartin
  • Huang Le
  • Ian Carroll
  • imharrywu
  • Jameson Lopp
  • Janusz Lenar
  • JaSK
  • Jeff Garzik
  • JL2035
  • Johnathan Corgan
  • Jonas Schnelli
  • jtimon
  • Julian Haight
  • Kamil Domanski
  • kazcw
  • kevin
  • kiwigb
  • Kosta Zertsekel
  • LongShao007
  • Luke Dashjr
  • Mark Friedenbach
  • Mathy Vanvoorden
  • Matt Corallo
  • Matthew Bogosian
  • Micha
  • Michael Ford
  • Mike Hearn
  • mrbandrews
  • mruddy
  • ntrgn
  • Otto Allmendinger
  • paveljanik
  • Pavel Vasin
  • Peter Todd
  • phantomcircuit
  • Philip Kaufmann
  • Pieter Wuille
  • pryds
  • randy-waterhouse
  • R E Broadley
  • Rose Toomey
  • Ross Nicoll
  • Roy Badami
  • Ruben Dario Ponticelli
  • Rune K. Svendsen
  • Ryan X. Charles
  • Saivann
  • sandakersmann
  • SergioDemianLerner
  • shshshsh
  • sinetek
  • Stuart Cardall
  • Suhas Daftuar
  • Tawanda Kembo
  • Teran McKinney
  • tm314159
  • Tom Harding
  • Trevin Hofmann
  • Whit J
  • Wladimir J. van der Laan
  • Yoichi Hirai
  • Zak Wilcox
As well as everyone that helped translating on [Transifex](https://www.transifex.com/projects/p/bitcoin/).
Also lots of thanks to the bitcoin.org website team David A. Harding and Saivann Carignan.
Wladimir
original: http://lists.linuxfoundation.org/pipermail/bitcoin-dev/2015-February/007480.html
submitted by bitcoin-devlist-bot to bitcoin_devlist [link] [comments]

Installing Bitcoin-Qt Dash: QT Wallet TestNet Guide = G15E19 9. bitcoind How to install Bitcoin Core Wallet and send Bitcoins Programming Bitcoin-qt using the RPC api (1 of 6)

Last block. 1 864 484. Time from last block. 00 hours. 02 minutes Bitcoin Core ist ein gemeinschaftliches, freies Software-Projekt, veröffentlicht unter der MIT-Lizenz. Release-Signaturen überprüfen Download über Torrent Quelltext Versionshistorie anzeigen. Bitcoin Core Release Signierschlüssel v0.8.6 - 0.9.2.1 v0.9.3 - 0.10.2 v0.11.0+ Oder wählen Sie Ihr Betriebssystem . Windows exe - zip. Mac OS X dmg - tar.gz. Linux (tgz) 64 bit. ARM Linux 64 bit ... Wallet options:-disablewallet : Do not load the wallet and disable wallet RPC calls -keypool=<n> Set key pool size to <n> (default: 100) -fallbackfee=<amt> A fee rate (in BTC/kB) that will be used when fee estimation has insufficient data (default: 0.0002) -mintxfee=<amt> Fees (in BTC/kB) smaller than this are considered zero fee for transaction creation (default: 0.00001) -paytxfee=<amt> Fee ... The address is created in the wallet that is controlled by bitcoin-qt, so it will eventually pop up in your transactions, but the coins take time to mature. This is a security precaution to avoid transactions that spend coins from a block that will later be replaced. Using the Bitcoin JSON-RPC might show them already even if they have not matured yet:./bitcoin-qt -testnet listunspent 0 should ... Bitcoin Wallet Vergleich – Die Besten Krypto Wallets 2020. Ein Bitcoin Wallet kann auch als digitale Geldbörse bezeichnet werden. Hier werden die Tokens unterschiedlichster Kryptowährungen gelagert. Dementsprechend ist es von essenzieller Bedeutung, dass man vertrauenswürdige Anbieter nutzt.

[index] [13954] [43304] [34750] [45413] [5630] [15215] [46443] [40523] [18467] [45714]

Installing Bitcoin-Qt

Syncing your Bitconnect QT wallet NEW updated 10/27/2018 - Duration: 20 ... How to Lower Bitcoin Fee and See Transaction Size in Bitcoin Core - Duration: 3:59. howtwos101 1,120 views. 3:59. How To ... JSON RPC Calls with Bitcoin qt (4 of 6) ... Creating a Local Bitcoin Testnet / Regtest - Programming Bitcoin - Duration: 23:19. Programming Bitcoin 19,041 views. 23:19. Programming Bitcoin-qt ... Intro to Chemistry, Basic Concepts - Periodic Table, Elements, Metric System & Unit Conversion - Duration: 3:01:41. The Organic Chemistry Tutor Recommended for you Wasabi wallet - 1 Download & Setup (Linux) - Duration: 13:17. ... How To Use Bitcoin Testnet - Getting Free Testcoins - Duration: 3:09. Bitcoin Tutorials 11,751 views. 3:09. Python Bitcoin ... Run bitcoin or bitcoind with the -testnet flag to use the testnet (or put testnet=1 in the bitcoin.conf file). There have been three generations of testnet. Testnet2 was just the first testnet ...

#